Monitor the attachment how should maintain

Monitor the attachment how should maintain? The following monitor manufacturers say;
(1) general maintenance
All cables, sensors and instruments accessories need to dry after each use, usually with soap and water dry can.NBP cuff is tied in patients due to long time, need regular cleaning, otherwise there will be a peculiar smell, and can shorten life.In cleaning NBP cuff, should first remove belt, cuff after cleaning, such as dry before you put it back.ECG lead wire and cable, SpO2 sensors and cables, temperature sensors and cables, in cleaning, don't let the cleaning fluid into the socket and sensors and other electrical wiring good is not closed completely.With a soft cloth soaked in the cleaning fluid rub gently Wash the appearance, dry before using.Rainbow monitor.
From a practical point of view, not for cleaning and maintenance of the cable and cuff, not only can make the patient produces psychological not music, but use after period of time, will be aging, harden and crack.
(2) disinfection method
Monitor for infectious diseases, the attachment of the patient will need to contact disinfection treatment.NBP cuff remove air pocket before disinfection, disinfection, then use high pressure vessel or gas can be immersed in the disinfection disinfectant.Air pocket and gas pipeline in the disinfectant to clean, to seal a port, not let the liquid into the inside.Liquid into the surface will lead to inaccurate measurement, even damage the machine.Rainbow monitor.
Cable and sensor can use detergent to scrub, but not in the high pressure vessel for disinfection.Electrical wiring is not sealed parts cannot be directly placed in disinfectant, completely sealed sensor can directly into the disinfectant (should be used according to the requirement of the instrument manual disinfectant).